|
To support an effective and efficient fabrication of our belts,
we provide a range of tools for our distributors and end-users.
PolySprint Series
Presetter Chart (PDF file)
Shows the various types of presetters (guide rails) available
for PolySprint splicing and lists specifications.
Carryflex (CFTG) presetters are also included.
FP30-10-50N (PDF file)
Finger puncher for 30mm finger geometry; compact and light
weight; single action punching system; maximum belt width 50mm
FP30-10-50N
and FP30-10-50SP (PDF file)
Comparison between the standard FP30-10-50N finger-puncher and
the enhanced FP30-10-50SP finger-puncher (designed for effective
punching of heavier materials such as TTE-4E18 and TTE-8E18 at
widths above 30mm). Both are for 30mm finger geometry, widths up to 50mm.
PolySprint Finger Puncher Selection Guide for 10x30mm Finger
(PDF file)
Table for selecting correct 30mm finger puncher
to use.
NPS-3050H1 (PDF file)
Heating press used with the 30mm finger geometry belt for making
endless belts at widths up to 50mm. Digital temperature readout provides accurate
reading.
NPS-3050C (PDF file)
Cooling press used with the 30mm finger geometry belt for making
endless belts at widths up to 50mm.
NPS-0310H1/H2 (PDF file)
Heating press used with the 30mm finger geometry belt for making
endless belts at widths up to 100mm. Digital temperature readout provides accurate
reading.
NPS-0310C (PDF file)
Cooling press used with the 30mm finger geometry belt for making
endless belts at widths up to 100mm.
PolySprint 50mm and 100mm
Toolkits (PDF file)
Shows two complete sets of tools available for 30mm finger geometry
PolySprint belts: one set for widths up to 50mm, and the
other for widths up to 100mm.
FP35-05-50 (PDF file)
Indexing puncher for finger-splice belting. FP35-05-50 punches
35mm long X 5mm pitch fingers for narrow Nitta
4E/5E type belts and for stronger splices in Nitta 8E type
belts, widths up to 50mm. Material punched can then be joined
using standard 30mm finger pre-setter and heating/cooling
press (NPS-3050H/C).
FP120-10-50 (PDF file)
Finger puncher for 120mm finger geometry used for making belts
endless.
Maximum belt width 50mm. Precise indexing system.
PCF-157D (PDF file)
Heating press for making 120mm finger geometry belts endless
at widths up to 50mm.
PCF-157C (PDF file)
Cooling press for making 120mm finger geometry belts endless
at widths up to 50mm.
NPS-1210-1/-2 (PDF file)
Automated heating and cooling press for making 120mm finger geometry belts endless
at widths up to 100mm.
Folder-gluer Series (XH-8E30/40/55 series only)
FP70-10-100 (PDF file)
70mm finger geometry puncher used for making folder-gluer belts
endless.
Maximum belt width 100mm. Precise indexing system.
PCF-157D (PDF file)
Heating press for making 70mm finger geometry belts endless
at widths up to 50mm.
PCF-157C (PDF file)
Cooling press for making 70mm finger geometry belts endless
at widths up to 50mm.
NPS-1210-1/-2 (PDF file)
Automated heating and cooling press for making 70mm finger geometry belts endless
at widths up to 100mm.
Poly Belt Series
S-300R (PDF file)
Portable PolyBelt skiver capable of skiving all Nitta PolyBelt.
Designed to skive to Nitta’s recommended skive lengths and can
skive up to 12'' wide and up to 7 mm maximum thickness. Weighs
just 46 lbs.
S-300R User Manual (PDF file)
User manual included with S-300R PolyBelt Skiver.
S-300R Skiving
Instructions
Step-by-step instructions, with pictures, for skiving material
using the S-300R PolyBelt Skiver.
PP-103 (PDF file)
PolyBelt press. Maximum belt width 100mm.
PP-103 Instructions (PDF file)
Instruction sheet for PP-103
PolyBelt press. Maximum belt width 100mm.
PP-200 (PDF file)
PolyBelt press. Maximum belt width 200mm; maximum thickness 5mm.
PP-200 Instructions (PDF file)
Instruction sheet for PP-200
PolyBelt press. Maximum belt width 200mm; maximum thickness 5mm.
PP-1535 (PDF file)
PolyBelt press. Maximum belt width 320mm; maximum thickness 6mm.
Both upper and lower plates heat.
Carryflex Series
FP-200 (PDF file)
Finger Puncher used for making CFTG style belts endless; 200mm
finger geometry.
PCF-2210 (PDF file)
Heating and Cooling press for making CFTG style belts endless; 200mm
finger geometry.
Miscellaneous
U-507 Sonic
Tension Meter (PDF file)
Measures belt tension without touching belt by analyzing
acoustic wave readings. Features keypad input and backlit
digital LCD readout.
|